Magnetic levitation : Maglev

A Magnetic levitation train or maglev is a train-like vehicle that is suspended in the air above the track, and propelled forward using the repulsive and attractive forces of magnetism. Because of the lack of physical contact between the track and the vehicle, the only friction is that between the carriages and the air. Consequently maglev trains can travel at very high speeds with reasonable energy consumption and noise levels (systems have been proposed that operate at up to 650 km/h, which is far faster than is practical with conventional rail transport). Whilst the very high maximum speeds make maglev trains potential competitors to airliners on many routes, the enormous cost of constructing the tracks has limited maglev vehicles largely to demonstration projects.

There are two primary types of maglev technology: One that relies on superconducting magnets and a newer, potentially more economical system that uses permanent magnets.

Japan and Germany are active in maglev research producing several different approaches and designs. In one design, the train can be levitated by the repulsive force of like poles or the attractive force of opposite poles of magnets. The train can be propelled by a linear motor on the track or on the locomotive or both. Massive electrical induction coils are placed along the track in order to produce the magnetic field necessary to propel the train, leading some to speculate that the cost of constructing such tracks would be enormous.

Other systems make use of permanently magnetic materials that can be used to line the tracks if the motor is mounted on board the locomotive. However, the weight of a super electromagnet on the train is a major design and operational issue. A very strong magnetic field is required to levitate a massive train, hence maglev research is tightly related to superconductor research for an efficient electromagnet. The effect of a powerful magnetic field on the human body is largely unknown. For the safety of the passengers, shielding might be needed, which would add additional weight to the train. The concept is simple, but the engineering and design aspects are complex.

Currently, some space agencies, such as NASA, are researching the use of maglev systems to launch spacecraft. In order to do so, the space agency would have to get a maglev-launched spacecraft up to escape velocity, a task which requires elaborate timing of magnetic pulses or a very fast, very powerful electric current (electric current, when passed through metals,can turn those metals into magnets[?], and the same is true of rare earth elements[?], which can also be metals.)

Transrapid (a German maglev company, which has a test track in Emsland, Germany), constructed the first operational maglev railway in the world, from Shanghai, China to the Shanghai airport. It was inaugurated in 2002. Commercial expoitation is planned for 2003.

An experiment had been conducted during a few years in Berlin at the end of the 1980s/early 1990s, with the M-Bahn[?]: a driverless magnetic train connecting 3 metro stations. The line was opened to the public for a few years, and was later replaced by a regular train.

See also: High speed rail


Common misspelling and questions (FAQ)

aglev  mglev  malev  magev  maglv  magle  amglev  mgalev  malgev  magelv  maglve  magle  mmaglev  maaglev  magglev  magllev  magleev  maglevv  jaglev  naglev  kaglev  kaglev  ,aglev  mqglev  mwglev  mzglev  mwglev  msglev  mzglev  matlev  maflev  mavlev  maylev  mablev  maylev  mahlev  mablev  magoev  magkev  mag,ev  magpev  mag.ev  magpev  mag;ev  mag.ev  magl3v  maglwv  maglsv  magl4v  magldv  magl4v  maglrv  magldv  maglef  maglec  magleg  magleg  magleb  maglevs 


In the parish of Minnigaff, when the Hare was cut, the first was the first to be married. In Germany also one of the names the corn has been reaped and only a few stalks are left standing, other, "Look how the Hare comes jumping out." In East Prussia they be chased out by the last reaper. The reapers hurry with their work, who does so, that is, who cuts the last corn, is much laughed at. At "to cut off the Hare's tail." "He is killing the Hare" is commonly France, and Italy. In Norway the man who is thus said to "kill the fellows to drink. In Lesbos, when the reapers are at work in two drive the Hare into their neighbour's field; the reapers who succeed sheaf of corn is made up and kept beside the holy picture till next children are warned not to go into the corn-fields because "the Cat will come and fetch you," "the Corn-cat goes in the corn." In some caught"; and at threshing, the man who gives the last stroke is harvest-supper are both called the Cat. About Vesoul when they cut in Dauphiné, at the beginning of reaping, a cat is decked out with ball-skin (_le chat de peau de balle_). If a reaper is wounded at reaping the cat is again decked out with ribbons and ears of.

getting around

home

adv.search

site map



Current spider themes

news archive

 

Licence of article: GNU FDL.
Original source @ wikipedia.