Ceramics

Ceramics is the art of creating useful and/or decorative objects from clay.

History of ceramics[?]

Ceramics as a domain of materials science

Ceramics is the term used for the study of ceramic materials, both in the traditional sense of pottery, and in a modern sense of oxide- or nitride-based materials.

Examples of Ceramic Materials

• Silicon nitride (Si₃N₄), which is used as an abrasive powder.
• Boron carbide (B₄C), which is used in some helicopter and tank armor
• Silicon Carbide (SiC), which is used as a succeptor in microwave furnaces and as a refractory material
• Aluminum diboride (AlB₂), which may become a leading reinforcement material in metal matrix composites.
• Zinc oxide (ZnO), which is used as a material in a diode for its electrical properties.
• Ferrite (Fe₃O₄), which is magnetic and is used in the core of electrical transformers.
• Steatite is used as an electrical insulator.
• Bricks (mostly aluminum silicates ), used for construction.
• Uranium Oxide (UO₂), used as fuel in nuclear reactors.

Properties of Ceramics

Ceramic materials are usually hard and strong. However, imperfections in the ceramic make them brittle. Under some conditions, such as extremely low temperature, some ceramics exhibit superconductivity.

Some ceramic materials can withstand extremely high temperatures without losing their strength. These are called refractory materials. They generally have low thermal conductivities, and thus are used as thermal insulators. For example, the belly of the Space Shuttles are made of ceramic tiles which protect the spacecraft from the high temperatures caused during reentry.

A couple of decades ago, Toyota researched on producing a ceramic engine which can run at a temperature of over 6000°. Ceramic engines do not require a cooling system and hence a major weight reduction in fuel-efficient vehicles. Fuel efficiency of the engine is also higher at high temperature. In conventional metallic engine, much of the energy released from the fuel must be dissipated as waste heat in order to prevent a meltdown of the metallic parts. Despite all the desirable properties, such engines are not in production because the manufacturing of ceramic parts is difficult. Imperfection in the ceramic leads to cracks. Such engines are possible in laboratory research, but manufacturing difficulties prevent them from becoming reliable products.

Processing of Ceramic Materials

Most ceramics must either be processed at high temperatures or by chemical methods. A common form of ceramic processing is Sintering a method of forming ceramic objects by mixing a ceramic powder with a binder and water to form a slurry, Spray Drying it, compressing the spray dried powder in a mold to form a "Green Body, and then heating it until atoms from the ceramic particles have diffused from one to another forming bridges between each particle and its neighbors.

Common misspelling and questions (FAQ)

eramics  cramics  ceamics  cermics  ceraics  ceramcs  ceramis  ceramic  ecramics  creamics  cearmics  cermaics  ceraimcs  ceramcis  ceramisc  ceramic  cceramics  ceeramics  cerramics  ceraamics  cerammics  ceramiics  ceramiccs  ceramicss  deramics  xeramics  feramics  feramics  veramics  c3ramics  cwramics  csramics  c4ramics  cdramics  c4ramics  crramics  cdramics  ce4amics  ceeamics  cedamics  ce5amics  cefamics  ce5amics  cetamics  cefamics  cerqmics  cerwmics  cerzmics  cerwmics  cersmics  cerzmics  cerajics  ceranics  cerakics  cerakics  cera,ics  ceram8cs  ceramucs  ceramjcs  ceram9cs  ceramkcs  ceram9cs  ceramocs  ceramkcs  ceramids  ceramixs  ceramifs  ceramifs  ceramivs  ceramicw  ceramica  ceramicz  ceramice  ceramicx  ceramice  ceramicd  ceramicx  ceramycs  ceramices  ceramix 


More than one third of the banks are insolvent of non-bank financing (e.g., insurance) are rays of hope in an otherwise soporific Despite the fact that most medium and large corporations in Russia own licensed finance in 2000-2001 was in the form of equity finance, corporate bonds, and $100 million (with 18-months maturity) and the corporate bond market may quintuple Capital, a Russian investment bank. growth, as Stanley Fischer pointed out in his speech to the Higher School of Director of the IMF. Last week, the OECD warned Russia that its economic growth one or two major borrowers, sectors, or commodities. Margins have declined (though of these fledglings have less than $1 million in capital. This is because meltdown - are leery of throwing good money after very bad. The golden opportunity The government's (frail) attempts to reform the sector by overhauling bank insurance, minimum capital and bankruptcy regulations, and mandatory risk pervasive, massive, and suspiciously orchestrated defaults of 1998-1999. Russia is Moreover, the opaque, overly-bureaucratic, and oligarch-friendly Central Bank is supports a minimum capital requirement of less than $5 million. Government sources.